PRICE IS ONLY $645 For Mini Condor Owners

VVDI BMW FEM/BDC Function :

VVDI2 BMW FEM/BDC system (function released and available, just no user manual)

Users can refer to following information (3 steps for make keys: get key info >programming FEM/BDC system >make keys)

1. Support make new key with ignition switch (support add spare key and all key lost, all key lost require ISN)

2. Support reset FEM/BDC KM (cluster require reset manually)

3. Support erase key (after erase the key position become blank position)

4. Support backup coding

5. Support restore coding

Notes:

1. Backup coding and restore coding can direct operation generally.

2. Add keys, reset KM, erase key must programming FEM/BDC system first

3. In FEM/BDC interface, if ‘get key info’ the type not support, it will show: customer should use “BMW E sys software” program FEM/BDC system. Then programming FEM/BDC system with VVDI2 BMW

4. When operation on ‘programming FEM/BDC system’interface,please don’t close this software window until all procedures completed.

5. Programming FEM/BDC system, require soldering and get eeprom. FEM 95128 chip, BDC 95256 chip usually there are 2 same chips on the module,
please refer to the software diagram, select the correct one.

6. Programming FEM/BDC system, must restore the original eeprom, restore coding. If cannot restore coding or after restore coding assemble FEM/BDC module back to car,
but with problem (such as the remote control cannot start the car
or the car with window problem) please use “BMW E sys software” coding for FEM/BDC system

7. If connect power to FEM/BDC module, but the relay keep ringing, please contact technical support for help. Usually operation on FEM/BDC should be ok, just need to programming.