SK-1123-FDQ

12~24 VAC/VDC auto-adjusting operation

Up to 1,000 possible user codes (000~999) programmable for output #1 and 100 (001~100) for output #2

Up to 50 (01~50) possible temporary visitor codes, which can be programmed for one-time or limited-time use (1~99 hours)

Output #1: Form C relay, 1A@30VDC max.

Output #2: Transistor ground, 100mA@24VDC

Outputs #1 and #2 can be programmed to activate for up to 99,999 seconds (nearly 28 hours)

Tamper output: N.C. Dry contact, 50mA@24VDC max

Mounts to standard single-gang back box

IP66 Weatherproof rating

Keypad illuminates when a button is pressed; backlight can be programmed for FULL or AUTO in standby mode

All features are programmed directly from the keypad: No need for an external programmer

EEPROM Memory protects programmed information in case of power loss

Up to 50 (01~50) duress codes for output #1, 10 (01~10) for output #2

Duress code signals a silent alarm if an authorized user is forced to open the door under duress

Egress input lets users exit the premises without keying in the code

Door sensor input for anti-tailgating operation

Interlocking input for connecting to a second keypad

Operating Voltage: 12~24 VDC/VAC

Current Draw – Standby: 15mA@12VDC

Current Draw – Keypress: 40mA@12VDC

Current Draw – Output 1 Active: 65mA@12VDC

Current Draw – Output 1 & 2 Active: 66mA@12VDC

Current Draw – Total Max: 100mA@12VDC

Output- #2 Transistor Ground: 100mA@24VDC
Output 1: 1A@30VDC

Output – Duress: 100mA@24VDC

Output – Interlock: 100mA@24VDC

Output- Tamper: 50mA@24VDC

IP Rating IP66

Input – Egress N.O. Ground

Input – Door Sensor N.C. Ground

Input – Door Inhibit N.O. Ground

Operating Temperature: -4~158 F (-20~70 C)

Operating Humidity: 5~95% Non-condensing

Dimensions: 4-3/4″x3-1/8″x1-13/16″ (120x80x46mm)

Weight: 16.2-oz (300g)