SB-L10V1-20Q

ENFORCER Plug-and-Play Backup Power units provide backup power to power devices during temporary power outages. Installs between the original power adapter and the powered device and auto-selects 5, 7.5, 9, or 12VDC.

Real-time backup power with no break when input power is lost

DC UPS Auto-start

Batteries provided by GE (2600mAh user-replaceable Lithium Ion – SB-P1012-26Q /2000mAh lithium polymer – SB-L10V1-20Q)

Over-discharge, overcharge, overload, short-circuit, and surge protection on input and output

LED indicators for power and backup operation

Auto-recognizes voltage (5/7.5/9/12VDC) input and sets corresponding output

Additional indicator LEDs for output voltage and an audible/visible (LED) alarm warning of an overload, voltage issue, or low battery

Type In-line UPS

Input 5/7.5/9/12VDC10%

Input Protection Overload and short-circuit fuse

Input Jack Type 5.5 x 2.1 mm DC Jack

Output Auto-configure 5/7.5/9/12VDC5%

Output Power Rating 10W

Output Protection Over-discharge, overload, short-circuit protection

Battery GE Lithium Polymer 3.7VDC/2000mAh

Battery Protection Overcharge, over-discharge, overload, short-circuit

Backup Time Half Load- 60 min, Full Load- 25 min

LED Indicators Voltage, power, alarm, backup

Output Cord 12″ (30.5cm)

Output Plug 5.5×2.1mm DC plug

Operating Temperature 32~104F (0~40C)

Operating Humidity 0~95% non-condensing

Dimensions 3-3/8″ x 2-1/4″ x 1-21/32″ (85 x 57 x 42 mm)

Weight 4.3-oz (121g)