Andromeda Research Labs AR32 Locksmith Eeprom Reader Kit #1

WHATS INCLUDED IN THE KLS-1 KIT

HARDWARE

The KLS-1 kit includes the following items:

1 – EPROM+ programming system

2 – ASERSM1A surface mount serial eepromadapter

3 – Surface mount clip with cable and plug (#ASOIC8)

4 – Surface mount probe set with cable and plug (#SMP8),

5 –Clonable Honda RED and BLACK keys required to reflash a RED key Honda,

6 – RESYNCHRONIZATION BLOCK required tosynchronize a reflashed Toyota or Lexus small black box immobilizer to the vehicle ECU.

Included Documentation

1. SERIAL EEPROM TUTORIAL – 93C56 (AUTOMOTIVE VERSION) This tutorial (directed at automotive applications)

describes how to use the system by providing a series of hands-on exercises using an actual 93C56 serial eeprom. Although this

tutorial covers more than just locksmith applications, it will teach you to use the additional capabilities of your KLS-1 package.

IMPORTANT: Perform the exercises in this tutorial before you begin working with any modules.

2. USING THE ASERSM1A SERIAL EEPROM IN-CIRCUIT INTERFACE ADAPTER

This document describes how touse the ASERSM1A adapter, including how the plug is attached and the purpose of the voltage selection slide switchs.

IMPORTANT: Read this document and become familiar with the purpose of the slide switchs as it will allow you to work suc-
cessfully with most parts in-circuit and confirm a GOOD READ of eeprom data. Also note the position of the black cable plug

when installed on the adapter: The BROWN wire is always on the right, below the arrow.

3. EEPROM+ PROGRAMMING SYSTEM USER MANUAL

This is the operation and user manual provided with the standard EEPROM+ system. Read this manual for installation and use information.

Please note: AR32 requires32 Bit Windows XP computer with a Serial Port. seePANASONIC TOUGHBOOK CF-29