MS1847 SeriesMS Deadlock/Deadlatch

The MS1847 Deadlock/Latch for ultra-narrow stile aluminum slidingdoors features a self-protecting bolt with adjustable bolt projection.

Function
A compact lock designed to fit within very narrow sliding door stiles withoutcompromising the high degree of security that these doors need. The sturdy stainlesssteel bolt has two important features not usually found in sliding door hardware. First,it is adjustable: a full 3/16″ [4.8 mm] lengthening or shortening of bolt projection ispossible by turning an exposed screw in the face of the lock. This can compensate forconsiderable misalignment between door and jamb. Second, the bolt is self-protecting:if the door is closed with the bolt in the locked position, the bolt will retract immediatelyupon contact with the jamb, thus preventing damage or accidental lockout.

Operation
Cylinder pulls are available separately for keyed operation. Three hub slot positions allowinstallation even where jamb and stile design provides severely limited turn clearance.

Features
CaseMeasures 1/2″ x 3-3/16″ x 1-1/8″ or [12.7 mm x 80.97 mm x 28.6 mm].Stainless steel.
Bolt:Three-ply laminated stainless steel. Designedto withstand approximately one-half ton ofeither horizontal or vertical force. Anti-lift boltstops both door-from-jamb pry bar attacksand attempts to lift the door from its track.
Faceplate:Rectangular face or full radiusedends (see how-to-order table on
back of page for dash numbers).
Latch Version:The MS1847-11 and MS1847-13 feature the samestainless steel hookbolt, but the bolt is springloadedfor automatic latching. All dimensionsand available accessories for the MS1847Deadlocks also apply to MS1847 Deadlatches.
Standard Package:Case-packed with mounting screws. Turnand cylinder pull available separately.

Download:MS1847 CatalogPage